Programmable Electronic Battery Discharger/Tester

Programmable Electronic Battery Discharger/Tester
EBD – 151 P / EBD – 301 P / EBD – 601 P

   
 
 
 
EBD – 151 P / EBD – 301 P / EBD – 601 P
 
Features
 
  • Discharge Capacity of 600 Watt in a very compact, light weight and rugged unit.
  • Programmable functions for controlling discharge time and cut off voltage.
  • Very simple front panel adjustment for precise setting of Discharge rate and display of Battery voltage and current on separate DPMs.
  • Constant Current (CC) and Constant Power (CP) mode of discharge for checking Battery Performance as per international specification.
  • Battery Discharge rate in watt can be viewed by simple sliding of a switch.
  • Convenient Handle to carry for field operation of the unit.
  • Small foot print of only 145 mm(W) X 245 mm (D) saving space on test bench.
  • Fully protected against Battery Reverse Connection, Over Power, Over Temperature and Over voltage.
 
Applications:
 
  • Programmable functions allow the user to measure and compare performance of different batteries.
  • The comparison of AH rating can also be made using timer function useful for R&D Dept. of Battery manufacturer.
  • To check Battery performance in QC Dept. of Battery manufacturer or bulk user.
  • To compare performance of different types of Batteries for vender approval.
  • For discharge of Batteries in the field before recharging to improve Battery reliability and performance.
  • Solar power system can be checked using constant power function.
  • Suitable for discharging of different types of Batteries such as SMF, Lead Acid, Tabular, GEL, AGM, VRLA, Ni-Cd, NI-MH, Stationery, Traction power etc.
 
Specifications:
 
  Model EBD – 151 P EBD – 301 P EBD – 601 P
1. Input Voltage 4 – 60 VDC
2. Input Current 0 – 30 Amp. 0 – 60 Amp. 0 – 120 Amp.
3. Input Power (Max.) 150 W 300 W 600 W
4. Operational Mode
  CC / CP Switch CC: Constant Current Mode.(The change in current is 0.2A or 0.5% of the adjusted value whichever is higher, over entire input voltage range.)
CP: Constant Power Mode.(Change in Power is +/- 6W or 0.5% of the adjusted value whichever is higher, over entire input voltage range.)
5. Load Switch To Turn ON / Turn OFF Load
6. Load Adjustment Through 10 Turn multiturn pot with indicating dial
7. Load Adjustment Range
  HI / LO Switch HI : 100 % of the range
LO : Approximate 10 % of the range
8. Protections
  Over Power 170 W +/- 15 W 325 W +/- 20 W 630 W +/- 25 W
  Over Voltage 65 V +/- 2V
  Over Temperature Internal Temp. Limited to 90 deg. C +/- 2 deg. C
  Reverse Input Up to 65V
9. Programming Mode
  (i) Timer Programming Discharge time setting: Timer can be programmed for set time in seconds, minutes or Hours in the following ranges.
Seconds: 0.01 sec. to 9999 sec.
Minutes : 10 sec to 9999 min.
Hours : 10 minutes to 9999 hrs.
Timer can be set for UP counting. After elapse of set time, it will switch off discharger. Voltage DPM will indicate Battery voltage at the end of Discharge cycle.
  (ii)Cut-Off voltage
programming
To Check how much time it takes for Battery to reach cut-off voltage, this mode is used. Cut-off voltage can be set between 2V to 60V with resolution of 100mV. Timer will indicate elapsed time for battery to reach cut-off voltage.
10. Operating Ambient 0 deg. C - 40 deg. C
11. Meters
  Voltage 3 1/2 Digit DPM Range - 200 VDC Resolution 100mV
  Current/Power 3 1/2 Digit DPM to indicate either current in Amps or Power in watts by selector switch.
Current range 200 ADC Resolution : 100mA
Power range 2000 watts Resolution : 1 watt
12. Indicators Load ON - GREEN LED
Alarm in the event of Over voltage, Over Power, Over Temperature, or Reverse input - RED LED
13. Terminals for DC Input
3 pos TB each for +ve and -ve M8 (8 mm) Stud with 8 mm Nut, one each for +ve and –ve.
14. Parallel Operation Possible.
15. Cooling Method Forced Air by Built in Fan
16. Dimension 304(H) x 145(W) x 245(D) mm
17. Weight 6.5 Kg. 7.5 Kg. 10 Kg.
18. Power 230V ± 10% AC 50Hz.
    (Optionally 110V +/- 10% AC 50Hz / 60Hz operation can also be supplied )
  Specifications subject to change without notice.
 
 
Home | Products | ELECTRONIC LOAD > SELF ENERGIZED | 100W |  BASIC | 150W  | 300W | 600W | 1200W | 1800W | 2400W | FULL FUNCTION  | 150W | 300W  | 600W | 1200W  | 1800W | 2400W
ELECTRONIC BATTERY DISCHARGER > BASIC | 150W |  300W  | 600W | 1200W  | 1800W | 2400W | PROGRAMMBLE > WITH TIMER  | 150W | 300W  | 600W | WITH AH METER  | 150W  | 300W  | 600W | 
WITH MICRO CONTROLLER  | 150W | 300W | 600W | HIGH CAPACITY BATTERY DISCHARGER > High Capacity Battery Discharge | Contact Us
 
Prime Electronics, Plot No. 39, Opp. Amraiwadi Talavdi, AEC Zonal Office Road, Amraiwadi, Ahmedabad-380026 ,India
Phone: (91) 79 22743671, Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Copyright © 2011, PRIME Electronics, All Rights Reserved.